GLP impression X5 Series V2.0.1

‍NEW FEATURES & IMPROVEMENTS

• Enabled sACN
• Forced subfixture mode normal when selecting DMX Mode 5 and 6
• Set default RDM Device Label based on respective fixture type
• Manual DMX input is now always using the performance mode "Smooth"

‍BUG FIXES 

• Fixed bug where changes to the DMX input source via iQ.Mesh were not reflected in the settings.
• Buttons were incorrectly assigned on impression X5 Bar 1000 IP and Bar 1000 in the battery mode.
• Fixed intermittent link-loss for hardware with the KSZ8863RLL Network PCB. Which in some cases caused fixtures to stop receiving network data.

‍DOWNLOAD and DETAILED INFORMATION 

The firmware update can be downloaded from our product website (link below).

Please note the detailed information on the update process, which can be found within the ZIP archive.

Download: GLP impression X5 Series Firmware V2-0-1 Rev20241128-1 (zip | 3.6 MB)

‍The software to operate the D3Prog can be downloaded here: D3Prog Website

‍Have you missed one of our technical newsletters? No problem. Here you can find our complete archive of previous Tech News.

This Newsletter was sent on Tuesday, 24 December 2024 19:17 ‍ by ‍GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

‍No longer want to receive our news? - Unsubscribe ‍