impression FR10 Bar V64

Main changes from V63 to V64

‍BUG FIXES 

Solved: Critcal Bug: sACN does not work.

‍UPDATE PROCESS

To prepare fixtures below version 60 for this update, a bootloader updated has to be

installed in advance before updating the main firmware V63.

Both updates can be done via DMX (daisy chain), one after the other.

Update with D3Prog, only, Version 42 or higher / PC software Version 605 or higher, daisy chain via RS485/DMX

‍VERSION DETAILS

Update: FR_10_DMX_V64.bin , FR_10_Main_Up_Bl_V6.bin

‍DOWNLOAD

GLP impression FR10 Bar Firmware V64 Rev20230526-1 (zip | 263.63 KB)

GLP impression X5 Series

Main changes from V1.0.1 to V1.1.3

‍NEW FEATURES & IMPROVEMENTS

‍Renamed DMX Mode 5 to Multipix Compressed RGB

Added new DMX Mode 6: Multipix Compressed RGBL

Added beta Firmware support. Version number has -beta appended and the screen background is purple.

‍BUG FIXES 

Zoom, Pan and Tilt can freeze (very seldom) because of bus transmission issues

Gamma correction was accidentally applied to background layer pixels in any ColorMix Mode.

Gamma correction should only be applied in ColorMix Mode: RGB.

This resulted in different color outputs when the same color values were applied to foreground and background layer.

Lightning shutter effect was not working correctly

‍UPDATE PROCESS

Fixtures need 1 update, if V1.0.1 or higher is installed already.

Via D3Prog (RS485/DMX):

1. Update the Main Application V 1.1.3 via DMX/RS485 via D3Prog (impression-X5_1.1.3_DMX.bin)

Optional via iQ.Service App (no Login needed) :

Change the Control Protocol in the Fixtures Protocol Setup Menu to iQ.Mesh,

or via DMX Control Channel to iQ.Service Connect: DMX 012-013 (4,7% - 5,1%)

1. Update the Main Application V 1.1.3

Please make sure that no other DMX receivers or consoles are active on the line

and fixtures Control Protocol is set to DMX!

‍INFO

This update is show critical as the color mix bug (Gama correction bug) is solved

and should not be done on site, especially when background colors are programmed and in use.

‍VERSION DETAILS

impression-X5_1.1.3_DMX.bin (provided via website as download and iQ.Service App)

‍DOWNLOADs

impression X5

GLP impression X5 Firmware V1-1-3 Rev20030602-1 (zip | 352.51 KB)

impression X5 Compact

GLP impression X5 Compact Firmware V1-1-3 Rev20030602-1 (zip | 343.29 KB)

impression X5 IP Bar

GLP impression X5 IP Bar 1000 Firmware V1-1-3 Rev20030602-1 (zip | 343.33 KB)

This Newsletter was sent on 22. Nov 2024 16:02 ‍ by ‍GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

‍No longer want to receive our news? - Unsubscribe ‍